Airtec Pneumatics Inc. | Air. Pressure. Motion
Our Products
ATEX & Explosion Proof ProductsCustom(er) SolutionsElectrically Operated ValvesISO and NAMUR Valves ISO and NFPA CylindersMechanically & Manually
Operated ValvesRodless CylindersStainless Steel ValvesVacuum EjectorsRocky™ ValvesAirtec Catalog Downloads
Our Products are Proudly Made in Germany & U.S.A.
All Categories > Mechanically and Manually, Electrically Operated and Standardized Valves > ISO Valves and NAMUR Valves > Series MN-06 Standardized Valve > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Series MN-06 Standardized Valve

 
Check up to five results to perform an action.

Standardized Valve Series according to NAMUR

Design and function
Spool valve for single acting actuators switched by an electrical signal.
The exhaust air is guided into the spring chamber of the actuator. The standard coil, plug socket, locating pin, screws and seals are included.
For outdoor applications or in areas with high humidity use coil 23-SP-011-1 or 23-SP-012-1.
Please specify required control voltage when ordering.
Valves of this series are available in explosion proof design in accordance with 94/9/EG (ATEX).

Search Items


Compare Items
   
  Results 1 - 25 of 132 Unit of Measure: Imperial Metric Both  1 2 3 4 5 »  

Item #

Function

Coil Type

Coil Options

Connection

Flow Rate

Pressure Range
MN-06-310-HN-141 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 12 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-142 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 24 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-152 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 24 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-156 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 115 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-157 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 230 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-161 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 12 V DC, 2.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-162 3/2-way, normally closed, single solenoid, air spring return Standard coil with plug socket 28-ST-01 24 V DC, 2.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-441 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 12 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-442 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 24 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-452 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 24 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-456 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 115 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-457 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 230 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-461 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 12 V DC, 2.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-462 3/2-way, normally closed, single solenoid, air spring return Standard coil without plug socket 24 V DC, 2.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-570 3/2-way, normally closed, single solenoid, air spring return Without coil and plug socket Power consumption 4.2 W, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-560 3/2-way, normally closed, single solenoid, air spring return Without coil and plug socket Power consumption 2.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-O42 3/2-way, normally closed, single solenoid, air spring return Coils with M12 connector and LED 24 V DC, 4.8 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-O62 3/2-way, normally closed, single solenoid, air spring return Coils with M12 connector and LED 24 V DC, 2.5 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-742 3/2-way, normally closed, single solenoid, air spring return Coils with higher humidity resistance without plug socket 24 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-757 3/2-way, normally closed, single solenoid, air spring return Coils with higher humidity resistance without plug socket 230 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-842 3/2-way, normally closed, single solenoid, air spring return Coils with higher humidity resistance with plug socket 28-ST-01 24 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-310-HN-857 3/2-way, normally closed, single solenoid, air spring return Coils with higher humidity resistance with plug socket 28-ST-01 230 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		29 to 145 psi
2 to 10 bar
MN-06-311-HN-141 3/2-way, normally closed, single solenoid, spring return Standard coil with plug socket 28-ST-01 12 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-311-HN-142 3/2-way, normally closed, single solenoid, spring return Standard coil with plug socket 28-ST-01 24 V DC, 4.2 W G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-311-HN-152 3/2-way, normally closed, single solenoid, spring return Standard coil with plug socket 28-ST-01 24 V AC, 7/4 VA G 1/4 at 1 and 3; flange to NAMUR at 2 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
  Results 1 - 25 of 132  1 2 3 4 5 »  
Airtec Pneumatics Inc. | Air. Pressure. MotionWe have been designing and manufacturing pneumatic components in Germany for more than 36 years. These pneumatic components are in sold and serviced through our worldwide distribution network. Clients from all industries put their trust in Airtec quality-from standard machinery and processing industries to robotics, high-tech machine tools, aerospace and semi conductor industries.
Airtec Pneumatics Inc. | Air. Pressure. MotionAirtec Pneumatics Inc. | Air. Pressure. Motion