Airtec Pneumatics Inc.
730 Racquet Club Drive
Addison IL 60101
Phone: 630.543.0265 • Fax: 630.543.4420
Email: info@airtec-usa.com • Website: www.airtec-usa.com
All Categories > Mechanically and Manually, Electrically Operated and Standardized Valves > ISO Valves and NAMUR Valves > Series MN-06 Standardized Valve > View Items  

Series MN-06 Standardized Valve

 
Check up to five results to perform an action.

Standardized Valve Series according to NAMUR

Design and function
Spool valve for single acting actuators switched by an electrical signal.
The exhaust air is guided into the spring chamber of the actuator. The standard coil, plug socket, locating pin, screws and seals are included.
For outdoor applications or in areas with high humidity use coil 23-SP-011-1 or 23-SP-012-1.
Please specify required control voltage when ordering.
Valves of this series are available in explosion proof design in accordance with 94/9/EG (ATEX).



  Results 126 - 132 of 132 « 6 

Item #

Function

Coil Type

Coil Options

Connection

Flow Rate

Pressure Range
MN-06-530-HN-560 5/3-way, center position closed Without coil and plug socket Power consumption 2.2 W G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-530-HN-O42 5/3-way, center position closed Coils with M12 connector and LED 24 V DC, 4.8 W G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-530-HN-O62 5/3-way, center position closed Coils with M12 connector and LED 24 V DC, 2.5 W G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-530-HN-742 5/3-way, center position closed Coils with higher humidity resistance without plug socket 24 V DC, 4.2 W G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-530-HN-757 5/3-way, center position closed Coils with higher humidity resistance without plug socket 230 V AC, 7/4 VA G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-530-HN-842 5/3-way, center position closed Coils with higher humidity resistance with plug socket 28-ST-01 24 V DC, 4.2 W G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
MN-06-530-HN-857 5/3-way, center position closed Coils with higher humidity resistance with plug socket 28-ST-01 230 V AC, 7/4 VA G 1/4 at 1, 3, 5; flange to NAMUR at 2 and 4 0.762 Cv
750 nL/min 		43 to 145 psi
3 to 10 bar
  Results 126 - 132 of 132 « 6 
Print Back