Airtec Pneumatics Inc.
730 Racquet Club Drive
Addison IL 60101
Phone: 630.543.0265 • Fax: 630.543.4420
Email: info@airtec-usa.com • Website: www.airtec-usa.com
All Categories > Cylinders > Proximity Sensors > Item # ZS-7300  


Item # ZS-7300, Proximity Sensors




Function Principles
    Magnetic field sensors are actuated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders. Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminum wall of the cylinder.
Mounting Tip
    The sensor is firmly fixed in the groove by clockwise rotation of the screw.



 Specifications 

Design
Electronic, magnet-induktive sensor, normally open PNP output

Cable
ø3,LifYY-11Y, PUR

Cable Cross Section
3 x 0.14 mm²

Cable Length
3.0 m

Overtravel Speed
≤10 m/s

Max. Absolute Hysteresis
≤1.0 mm

Temperature Drift
≤0.1 mm

Min. Absolute Repeat Accuracy
≤±0.1 mm

Operating Temperature
- 25 ° to + 70 ºC

Degree of Protection
IP 67

Housing Material
Plastic PA 12

Switching Status Indication
LED yellow

Rated Operational Voltage
10 ... 30 V DC, max. ripple ≤ 10 % Upp

Rated Operational Current IE DC
≤200 mA

Breaking Capacity
6 W

No-Load Current
≤15 mA

Max. OFF-State Current
≤0.1 mA

Max. Switching Frequency
≤1 kHz

Rated Insulation Voltage
≤0.5 kV

Short-Circuit Protection
yes, cyclic

Max. Voltage Drop at IE
≤1.8 V

Wire Breakage
yes

Reverse Polarity Protection
yes/complete

Vibration resistance
55 Hz (1 mm)

Shock resistance
30 g (11 ms)

Explosion Proof
II 3 GD EEx nA II T4 X IP 67 T 110 °C



Print Back